Mīkini Welding Ultrasonic

 

Nīnau papahana	hiki HAIFEI
He aha nā mea hiki ke loiloi?	Ke keleawe ʻole, ke keleawe tinned, ka alumini a me nā mea conductive like ʻole i koho ʻia
He aha nā hale hui i kākoʻo ʻia?	Uea-i-uwea, uea-i-terminal, metala-a-metala ami kiko a me uea a paipu hoopa'a hope.
He aha ka ʻike e koho ai i ka mīkini?	Mea, pauku - alakai holookoa, geometry hui, wahi wiliwili, koi ikaika a me ka manawa kaapuni.
Pono ka solder a i ʻole ka flux?	ʻAʻole. Hoʻohui maʻamau ka hoʻoheheʻe ʻana i nā mea metala me ka ʻole o ka solder, flux a i ʻole metala hoʻopiha
Hiki ke nānā ʻia ka maikaʻi o ka weld?	Hiki ke nānā ʻia ka ikehu welding, ka manawa, amplitude, pressure, displacement a me nā ʻikepili hana ʻē aʻe ma muli o ka hoʻonohonoho mīkini.
Hiki i kekahi mīkini ke hana i nā huahana like ʻole?	Hiki ke mālama ʻia nā ʻohana huahana i koho ʻia ma o nā mea hana hiki ke hoʻololi a mālama ʻia nā ʻano kuʻihao
Hiki ke hoʻohana ʻia nā mea hana?	Hiki ke hoʻohui ʻia ka hānai ʻana, ka hoʻonohonoho ʻana, ka welding, ka nānā ʻana, ka wehe ʻana a me ka hoʻopaʻa ʻikepili
Loaʻa ka laʻana wiliwili?	ʻAe. Manaʻo ʻia ka hoʻāʻo laʻana ma mua o ka hoʻopau ʻana o ka mīkini a me ka hoʻonohonoho paahana

 

 

ʻO ka wiliwili metala kani he kaʻina hoʻohui -state. Mālama ʻia nā mea hana ma waena o kahi sonotrode a me kahi anvil oiai ke hoʻohana ʻia nei ka haʻalulu mechanical frequency kiʻekiʻe ma lalo o ke kaomi hoʻopaʻa ʻia.

ʻO ka vibration hui pū ʻia a me ke kaomi e hoʻopuka i ka neʻe interfacial kūloko a me ka deformation plastic. Kōkua kēia i ka hoʻopau ʻana i nā kiʻiʻoniʻoni ili a lawe mai i nā ʻili metala maʻemaʻe i kahi pilina pili, e ʻae ana i kahi paʻa metallurgical e hana me ka hoʻoheheʻe ʻole ʻana i nā mea kumu.

ʻO ka pōʻaiapili welding piha maʻamau e komo pū me:

• Hoʻonoho ʻia nā uea i kāʻili ʻia a i ʻole nā ​​mea metala i loko o ka mea hana.
• Hoʻohana ka mīkini i ke kaomi paʻa paʻa.
• Hāʻawi ka ultrasonic generator i ka ikehu uila i ka mea hoʻololi.
• ʻO ka mea hoʻololi a me ka booster e hoʻouna i ka haʻalulu mechanical i ka sonotrode.
• Hoʻohana ka sonotrode i ka vibration i ka pilina kuʻi.
• Hoʻohui nā mea a hana i ka hui.
• Hoʻopau ka ʻōnaehana i ka pae paʻa a hoʻokuʻu i ka mea hana.
• Loiloi ʻia ka ʻikepili welding e pili ana i nā palena kaʻina hana i hoʻonohonoho ʻia.

ʻO ka hui hope e pili ana i ka pilina ma waena o ka amplitude, ke kaomi, ka ikehu kuʻi, ka manawa, ke kūlana mea hana a me ka paʻa o ka mea hana. Pono e hoʻomohala ʻia kēia mau ʻāpana ma o ka hoʻāʻo ʻana ma mua o ke koho ʻana mai ka nui uea wale nō.

 

 

ʻAno mīkini	Hoʻohui hui	Mea hana maʻamau	Ke kumu koho nui
mīkini hoʻopili uea kani kani ultrasonic	Uea-i-uea	Nā pūʻolo uea keleawe a alumini paha	ʻO ka pauku - alakaʻi holoʻokoʻa, hoʻonohonoho pūʻolo a me nā ana splice
mīkini hoʻoheheʻe kani kani kani	Uea-i-terminal	Uea, lug, terminal a pili uila	ʻĀpana uwea, mea hoʻopau, ʻāpana a me ka weld
Kani ultrasonic welder wahi metala	Metala-i-metala	Foil, pā, terminal a mea conductive paha	ʻO ka waihona waiwai, kahi hui a me ka ikaika e pono ai
Uea a i ʻole ka mīkini hoʻopaʻa hope	Hoʻopau i ka sila a me ka hoʻokumu ʻana	ʻO ka pūʻolo uea keleawe, ka mea hoʻokele wili a i ʻole ka paipu	ʻO ke anawaena, ka mānoanoa o ka paia a me ka ʻaoʻao hoʻopau
ʻOkoki ultrasonic kuʻihao nenoaiu	Kaʻina hana hoʻohui	Uea -nui kiʻekiʻe a me nā hui hoʻopau	ʻO ka manawa pōʻai, ka ʻai ʻana, ka nānā ʻana, ka traceability a me ka loli hoʻohālike

 

Pono e hoʻopaʻa ʻia nā mana kikoʻī, alapine a me nā pae wili ma ka ʻaoʻao huahana pili a i ʻole ma o ka loiloi laʻana.

 

 

 

 

 

Ke koho ʻana i ka mīkini hoʻoheheʻe kani ultrasonic pono e wehewehe i nā koi wili, ka nui o ka hana, nā kikoʻī waiwai, a me ka pae automation e hoʻohālikelike i ke ʻano mīkini maikaʻi loa.

E ho'omaopopo i kāu ka'ina hana he ho'okahi-uea pahu ku'i a i 'ole he nui-wiea splicing, e ho'oholo pololei i ke 'ano o ka mīkini.

Nā mīkini hoʻoheheʻe terminal:

• Hoʻokahi uea i nā hoʻopili metala
• Kiʻekiʻe weld helu a me ka pololei koi
• ʻO nā ʻoihana maʻamau: nā pahu pahu kaʻa kaʻa, nā mea hoʻohui hale, nā pahu uila

ʻO nā mīkini hoʻopili uea:

• ʻO ka hoʻohui ʻana i nā uea he nui i loko o kahi kaula
• Pono i nā pilina ha'aha'a-kū'ē, ki'eki'e{1}}ikaika
• ʻO nā ʻoihana maʻamau: nā ʻoihana kaʻa, nā pahu pahu pahu pahu, nā uwila hoʻokele ʻoihana

 

E hōʻoia i ke ana uea, mea conductor, a me ke ʻano insulation e hōʻoia i ka maikaʻi o ka weld.

• ʻAno uea a me ke ʻano alakaʻi: anana liʻiliʻi (0.1–1.0 mm²) kūpono i ka hoʻoheheʻe ʻana; anana nui, -nui, a i ole keleawe/aluminika huikau uea pili i ka splicing
• ʻAno insulation: PVC, TPE, silicone, etc., pili i ka ikehu a me ke kaomi
• Pono i kēia manawa: ʻo nā uwea kiʻekiʻe -pono i nā weld haʻahaʻa-kūpono no ka hilinaʻi lōʻihi-

 

E helu i ka throughput e pono ai e koho i ka pae automation kūpono, e pale ana i ka overinvestment a i ʻole lawa ʻole ka hiki.

• Mīkini wiliwili pahu hoʻokahi -kūlana hoʻokahi: kūpono no ka hana pūʻulu liʻiliʻi
• Mīkini -nui/mīkini hoʻopili 'akomi: kūpono no ka hana kiʻekiʻe, -wikiwiki kiʻekiʻe.
• E hoʻoholo i ka wikiwiki o ka hana (welds i kēlā me kēia minuke / hola) e hoʻohālikelike i ka mana mīkini

 

E koho i ka pae automation e pili ana i ka paʻakikī o ka hana a me nā koi ʻikepili.

• Mīkini kumu: hoʻouka lima, kūpono no nā pūʻulu liʻiliʻi a i ʻole R&D
• Semi-akomi: hoʻouka lima, kuʻikuʻi ʻakomi, no ka hana ʻana
• Hoʻohui piha ʻia/robot-: multi{1}}station hoomau hana, pololei kiʻekiʻe
• ʻIke ʻikepili: nā mīkini kikohoʻe a i ʻole PLC no ka nānā ʻana i ka hana a me ka traceability maikaʻi, koho hoʻohui MES

 

E koho i kahi brand hilina'i no ka -hana pa'a no ka manawa lō'ihi a me ka ho'onui 'ana i ka laina hana e hiki mai ana.

• ʻO ka paʻa ʻana o ka mīkini, nā ʻāpana wili hiki ke hoʻololi ʻia, a me nā mea hiki ke pani ʻia
• Hoʻolālā modular no ka hoʻohui ʻana i nā kikowaena a i ʻole ka hoʻomaikaʻi ʻana i nā robotics
• Loaʻa i ka lawelawe ma hope o -kūʻai a me ke kākoʻo ʻenehana

 

Hōʻike	Unite	HF-WX-20DZ	HF-WX-20WD	HF-WX-20XC	HF-WX-20XB	HF-WX-20DA	HF-WX-FW	HF-WX-20SD
Mana Kiekie	kW	16	8	9 / 6	3	6 / 3	3	3
Ka pinepine hana	kHz	20	20	20	20	20	20	20
Hookomo mana	V/Hz	380/50	380/50	380/50	220/50	380/50 / 220/50	220/50	200–380/50
Mea Hookomo Ea	MPa	0.5	0.5	0.5	0.5	0.5	0.5	0.5
Kaumaha Lako	kg	1200	680	80 / 50	30	150 / 150	20	80
Nā Ana - Ka lōʻihi	mm	2060	1300	120 / 80	100	66	/	/
Ana - Laulā	mm	1010	1000	90 / 85	65	70	55	/
Nā Ana - Kiʻekiʻe	mm	2300	2000	160 / 150	25	85	25	/
Palena Welding	mm²	50–95	35–70	5–100 / 25–50	0.5–25	16–35 / 2–16	2–10	0.02–0.2 mm

 

 

 

1	Ka ikaika hui nawaliwali a kulike ole	ʻO nā kumu i hiki ke loaʻa i ka puka makani ʻāpana kūpono ʻole, nā mea hana kahiko, nā mea hoʻoheheʻe i haumia, ka hoʻokomo uea like ʻole a i ʻole ka hoʻololi ʻana i ka pauku - alakaʻi holoʻokoʻa.
2	ʻO nā kaula ʻoluʻolu a puni ka Splice	Hiki ke hopena i nā kaula ʻalo ma muli o ka hoʻonoho uea hewa ʻole, nā alakaʻi ʻaoʻao kūpono ʻole, lawa ʻole ka paʻa paʻahana a i ʻole ka nui o ke keʻena splice hewa.
3	Hoʻololi Uea Nui	Hiki i ke kaomi nui, ka ikehu a i ʻole ka amplitude ke hana i ka splice paʻa loa a i ʻole e hōʻino i nā kaula pākahi. Pono e nānā pū ʻia ka wahi pili mea hana a me nā palena weld.
4	ʻO ka haʻihaʻi ʻana a i ʻole ke kulou ʻana	ʻAʻole lawa ke kākoʻo o ka pahu, a i ʻole kokoke loa ke kūlana wili i kahi piko, ʻaoʻao a i ʻole ʻāpana lahilahi. Pono e nānā ʻia ka geometry terminal a me ke kākoʻo paʻa ma mua o ka hoʻonui ʻana a i ʻole ka hōʻemi ʻana i ka ikehu welding.
5	Poino i ka Uea Uea	Hiki ke poino i ka insulation ke lawa ʻole ka lōʻihi o ka wehe ʻana, kokoke loa ka insulation i ka wahi wili a i ʻole ke kākoʻo pono ʻana i ke kaula.
6	Nā hopena paʻa ʻole ma hope o ka holo ʻana o ka hana lōʻihi	Hiki ke hoʻololi i ka paʻa -mea hana, ka hoʻololi ʻana i ka mahana a me nā ʻili mea hana like ʻole. Pono ka hoʻomaʻemaʻe mau, ka nānā ʻana a me ka mālama pale.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ʻAʻole hiki ke koho ʻia ka mīkini hoʻoheheʻe ultrasonic pololei mai ka nui conductor wale nō. Pono e loiloi pū ʻia ke ʻano hui, mea, hoʻolālā terminal, weld area, ikaika mechanical, hana uila a me ka pōʻai hana.

E hoʻouna iā HAIFEI i kāu mau kaha kiʻi, nā hui uea, nā laʻana terminal a me nā koi ʻae. E nānā ko mākou mau ʻenekini inā pono kāu noi i ka mīkini hoʻopili uwea, ka welder terminal, ka welder wahi metala, ka mīkini hoʻopaʻa hope a i ʻole ka ʻōnaehana hoʻoheheʻe kani ultrasonic maʻamau.

 

 

Noi i ka hoʻoheheʻe ʻana i ka ultrasonic welding

 

 

ʻIke ʻia ʻo Wuxi Haifei Intelligent Equipment Co., Limited{1}}ʻo ia kekahi o nā mea hana a me nā mea kūʻai aku ma Kina. E ʻoluʻolu e ʻoluʻolu e kūʻai i ka mīkini welding ultrasonic kiʻekiʻe i hana ʻia ma Kina ma aneʻi mai kā mākou hale hana. No ke kūkākūkā kumukūʻai, e kelepona mai iā mākou.